Вести о компанији

Има ли још упита за пуњење ЕВ?

2021-04-01

Било која питања за ВасЕВCштети?

 

1. Моћи укључујемоклима уређај у току тхеЕВ Cнаношење штете?

When тхеweather is hot, if there is no rest place around тхеcнаношење штете station, many car owners will ask: Can тхеelectric car be turned on in тхеair-conditioning to rest у току тхеcнаношење штете process?

Like refueling at a gas station, in principle, it is recommended to charge away from people, that is, when people leave тхеcar у току cнаношење штете; this can eliminate potential safety hazards from тхеsource. Secondly, тхеact of turning on тхеair conditioner while cнаношење штете will increase тхеinternal charge load of тхеbattery and affect тхеservice life of тхеbattery.

Therefore, when choosing an outdoor cнаношење штете station, try to choose a cнаношење штете station with restrooms and other supporting facilities for cнаношење штете. When тхеcar is cнаношење штете, leave тхеcar and go to тхеlounge to wait.

 

2. Will тхеbattery бити оштећен ако користиFast ЕВCharger?

To be precise, frequent fast cнаношење штете will cause certain damage to тхеbattery compared to slow cнаношење штете.

Because fast cнаношење штете uses a current that is several times or even ten times higher than тхеstandard cнаношење штете current for cнаношење штете. In тхеfast charge mode, when тхеpower is charged to about 80%, тхеsubsequent power will be fully charged in тхеslow charge mode.

If fast cнаношење штете is used frequently, тхеpolarization of тхеbattery cells will be accelerated, causing тхеcells to deplete lithium. In тхеprocess of lithium analysis, lithium ions will be reduced, which will eventually lead to a decrease in battery capacity, which will affect battery life. Under normal circumstances, let тхеbattery rest for a short time after fast cнаношење штете, тхеlithium metal will return to lithium ion, and тхеcritical temperature will return to тхеnormal value. However, frequent fast cнаношење штете will reduce тхеbattery's ability to restore.

Therefore, in order to ensure that electric vehicles can better solve тхеcruising range, car owners can choose тхе“daily slow cнаношење штете, emergency fast cнаношење штете” approach, or slow cнаношење штете once a week to supplement.

 

3. Шта да радимif тхеЕВfailed to бити оптужен?

The electric vehicle cнаношење штете process is mainly divided into 6 steps: physical connection, low-voltage auxiliary power-on, cнаношење штете handshake, cнаношење штете parameter configuration, cнаношење штете, and cнаношење штете end.

When cнаношење штете an electric vehicle, тхеfirst condition that must be met is тхеmatching of тхеcнаношење штете gun and тхеcнаношење штете interface, that is, тхеphysical connection. If тхеcнаношење штете gun can be inserted into тхеcar normally, тхеfoundation of cнаношење штете is established. Low-voltage auxiliary power-on is тхеprocess of powering on тхеvehicle's BMS. Only when тхеBMS is powered on can further handshake and communicate with тхеcнаношење штете pile, that is, mutual confirmation of тхеversion. If тхеversion is тхеsame, тхеBMS will send detailed vehicle information and exchange information with тхеcнаношење штете pile. During тхеcar cнаношење штете process, тхеtwo will generate a large number of messages. If there is a mismatch, тхеnormal cнаношење штете work cannot be completed.

Normally, once тхеcнаношење штете fails or тхеcнаношење штете is interrupted, тхеcнаношење штете pile will display тхеreason code for тхеcнаношење штете failure. Once this happens, it is recommended to call тхеcustomer service of тхеcнаношење штете station or look for тхеhelp of тхеstation staff to determine whether it is тхеcнаношење штете fault caused by тхеcar or тхеcнаношење штете pile.

 

 

Цоннекионс ТецхнологипонудеПреносна кућна употребаЕВCharger са добрим квалитетом.

Добродошли сте да нас контактирате за више детаља.